Ich hab die englische Anleitung nochmals studiert, und da ich eigentlich schon weiter als Punkt 1. war hab ich dem bis jetzt nie Beachtung geschenkt..
Aber ich glaube da liegt der Hund begraben.. leider reichen meine Englischkentnisse nicht 100% aus..
1.
You will have to support the car on jack stands or a lift. Part of the procedure
for installing the new lever is to retain the reverse lockout in itʼs unlocked position
from underneath the car. Find where the reverse lockout cable connects to the
cam on the transmission. The cam has a hole in it that you can use to retain the
cable in its unlocked position with a pin or Allen wrench. The picture below
illustrates the cam; itʼs position, and how to retain it in the unlocked position. It is
recommended that you usually retain it behind the transmission rather than in the
hole in the transmission. This gives you more cable to work with when installing
the MODE Racing lever. Leave this here until the install is done.
Ist das der Grund wiso das Kabel nicht ganz noch oben kommt, es fehtl ja nicht viel, kann das Ende durch den Schlitz wo es dann befestigt wird schon sehen..