Hai Leute,
Habe gestern erfolgreich mein Turbo Timer eingebaut, und auch hier über Forum ne Englische Anleitung gefunden! Der Einbau war also kein Problem, nur jetzt muss ich gestehen das ich mit der Bedienung nich so ganz klar komm weil ich die Erklärung der Englischen Bedienugsanleitung nich richtig versteh... ja es darf gelacht werden
Also zur Bedienung steht dort folgendes:
1. Power Button
2. Minute Button (Start / Stop for stop watch fnction)
3. Second Button
(lap button for stop watch function)
Setting:
When the Timer is activated the modes will appear as follows:
Automatic Timer --> Manual Timer --> Temperature --> Battery Voltage --> Stop Watch --> Lap Time Display --> Off
Press the POWER to button to switch to the next mode.
Description of Modes:
The idling time is automatically set by the timer. Idling time varies on what mode the auto timer is set on and the variations of the vehicles
ignition pulse.
** Mode display is located on the left side of LCD
Description of Modes:
1. Automatic Timer A: When the FATT DC is turned on the Automatic Timer mode will be activated.
The “TIMER A” will be displayed. To set the minimum time of the auto timer press the MINUTE Button once and the screen will flash. Then
press SECOND button to set the base time between 0 to 50 seconds.
** When the A appears, the Automatic Timer function is activated. Press the MINUTE button on the Temperature or Battery Voltage display
to turn the Automatic Timer on or off. Make sure that the letter A appears The A means auto timer is activated.
A – H mode will start to calculate time to automatic function mode after 1800 rpm. Low setting
A – H mode will start to calculate time to automatic function mode after 1200 rpm. Medium setting
A – S mode will start to calculate time to automatic function mode after 900 rpm. High setting
E – L mode will add time according to how long the ignition has been on roughly 55 minutes per hour
E – H mode will add time accrding to how long the ignition has been on roughly 130 minutes per hour
Press the POWER btton twice to get to the manual timer mode. The screen will display “ TIMER” and it will n be an A visible. To set the
time of the manual timer press the MINUTE button to set the number of minutes you want the car to idle after the vehicle has been shut off.
Press the SECOND button set the number of seconds desired. ou can choose idling times between 0 to 10 minutes
When the unit is first turned on press the POWER button three times to display the Temperature mode. The temperature sensor is in the
control module.
The Temperature is displayed in Celsius ONLY. When on Temperature display press the MINUTE button to activate the Automatic Timer
function the letter A will appear. When on Temperature display press the MINUTE button to activate the Manual Timer function the letter A
will disappear. When the unit is first turned on press the POWER button five times to display the Stop Watch mode. This can be used to
record the time it takes to get to point A to point B. The Stop Watch will record times up to 9 minutes and 59 seconds. To start and stop the
Stop Watch press the MINUTE button. Press the Second button to jump to another Lap. There is 5 Laps available. If the laps are full the
LCD will display full when trying to ecord another Lap. To clear the time press the SECOND button and hold it down for 5 second. When
the unit is first turned on press the POWER button six times to display the Lap mode. The Lap mode can display up to 5 recorded times.
Press the SECOND button once to scroll through and view the recorded lap times. Press he second button and hod it down for 5 second to
CLEAR all the recorded times. When the unit is first turned on press the POWER button seven times to display the OFF mode. The leave
the display on off mode and the FATT DC will turn off automatically. Press the POWER button to turn on the Turbo Timer.
LCD Display:
CONTRAST: When the FATT DC is turned off the user can adjust the contrast by pressing the MINUTE and SECOND button. the user can
adjust he illumination between 0 to 100.
BAR DISPLAY: When the Turbo Timer is on auto timer E Mode the user can have different bar displays. In order to do this select E – H or
e z- L mode in the Auto Timer setting. When the E Mode is activated the Bar Display will move side to side.
To change the Bar Display press the SECOND button down for 3 seconds and the display will change. there will be 4 possible displays. 3
of the displays will be automatically moving and the fourth display will move according to the vehicle ignition pulse.
A And B SWITCH: There is a switch on the control module. A is for most vehicle applications. The B switch is for vehicles with low ignition
pulses.
JOA DAS WARS...
Also ein Teil versteh ich schon, nur irgendwie nich im zusammenhang! Wär also super wenn einer von euch Englisch Cracks, mal eben ne Zusammenfassung des ganzen in Paar sätzen hier Posten könnte!!!
Wär echt suppppppper nett
=)